More playing with living hinges
Posted by
Joined Dec 30, '17 

This was the natural progression of my early experiments with living hinges.

This was done with PG medium maple. The rods are 1/8 inch brass that I cut down with a small hacksaw. Superglue was (so far) sufficient for keeping it together.

I had to engrave the post holes for the rods three times to get a good depth. Probably could’ve done with just two since I discovered afterwards that I had the size tight enough that I needed to lightly tap the rods in with a hammer to get them in.

Hundreds of ideas brought to life
Explore Wood or Organization projects.
Toast Tongs

Living Hinge Doorbell Box

Butternut box with engraved top and tiny hinges

An update on the tool box project